Your fluid control specialists
08 9353 1188


Features & Benefits
  • Superior Accuracy at constant flow: With all other conditions being constant, the SAMPI meter does not vary more than 0.05% in repeatability over the entire range.
  • Accuracy over the widest range of flow: The SAMPI meter has an ideal combination of minimum seal or slippage area with lowest pressure differential across the seal. This results in better accuracy over a wide range of flow than available in other type of commercially produced positive displacement meters.
  • Accuracy regardless of pressure fluctuations: With the SAMPI meter’s unique dual-case design, the bearing surfaces of the meter element are internally and externally subjected to the same system pressure. Therefore, the meter element cannot be stretched or distorted to cause changes in seal area that would adversely affect accuracy.
  • Low Maintenance cost.
  • Low pressure loss.
  • Self-contained operation without electrical power.
  • Available with traditional mechanical seals or with glandless magnetic driven pulse output device.
  • Weights & Measures approval (world-wide) for custody transfer.
  • Electronic accessories designed and approved to ATEX 94/9 normative.
  • Can be partnered with Liquip’s DFV electronic register for an automatic register head.

1″ 1/2 up to 4″.

Flow Rates
19 L/min – 3,780 L/min.

End Connections
ANSI Flanged, NPT, BSPT, Slip Weld.

Pressure Ratings
Cast Case: 10 & 25 bar (150 & 350 PSI) non-shock working pressure.
Two Case Steel Case: 10/10, 10/21, 20/20, 20/50 bar (150/150, 150/275, 300/300, 300/720 PSI); 40/100 bar (600/1440 PSI) ANSI non-shock working pressure.

-Meter Body, Rotor and Vanes: Aluminium, Hard Anodized Aluminium, Cast Iron, Steel, Stainless Steel.
-Seals: Buna “N”, Viton®, Teflon®.

Accuracy (Mechanical Registration)
Capable of ±0.125% over a 5:1 range.
Capable of ±0.22% over a 10:1 range.
Capable of ±0.5% over a 40:1 range.

Repeatability (Mechanical Registration)
0.05% (±0.025%) of reading over entire range.

SM5/M5 1½” or 2″ 227 L/Min
SM7/M7 2″or 1½” 500 L/Min
SM10/M10 2″ 550 L/Min
SM15/M15 3″ or 2″ 1,000 L/Min
SM25/M25 3″ 1,150 L/Min
SM30/M30 4″ or 3″ 1,700 L/Min
M40* 4″ 1,700 L/Min
SM50 Gravity 4″ 1,300 L/Min
M60* 4″ or 6″ 2,800 L/Min
M80* 6″ 3,300 L/Min


Enquire about this product

  • This field is for validation purposes and should be left unchanged.

All pictures shown are for illustration purpose only. Actual product may vary. All specifications are subject to change without notice.

Product Code: SM10

Need a solution? We’re here to help

We pride ourselves on our wide industry knowledge. We’ve got an expert team and are able to source products worldwide.

Contact Us

Petroleum, Aviation & Mining Supplies