Flexible Entry Boots
FlexWorks™ Flexible Entry Boots are reliable, safe seals for pipe and conduit entries into underground containment sumps. These entry boots allow for angled pipe entries and have no exposed metal parts to the underground environment. These entry boots are available in a variety of sizes and designs to accommodate rigid and flexible piping, ducting and access pipe.
Features & Benefits
- Watertight pipe and conduit entries
- Installation on flat or round surface
- Added flexibility permitting angled entries up to 15 degrees
- 3rd Party Testing Approved
Angled Entries
Primary pipe and access pipe entering the containment sumps may not be perpendicular with the sump wall. Angled entries are generally a result of directional plumbing restrictions on the inside of the containment chamber due to space limitations. Flexible entry boots are flexible enough to permit angled pipe or conduit entries (on two axes) into the sidewall of a containment chamber. All flexible entry boots permit angled entries up to a 15-degree angle off the perpendicular center line in any direction without leaking or putting undue stress on the pipe or conduit seal.
Sump Entry
Flexible entry boots have been tested to withstand a minimum of 6’ of liquid head pressure. These seals provide a studded flange connection to create a positive and secure seal where the rubber contacts the sump wall and also around the pipe or conduit. Tightening down on a series of stud fasteners with a compression ring provides a high compression mechanical seal compared to screw on type bulkhead seals.
Ordering Specifications
| Model # | Application |
Weight
|
Hole Saw
|
||
|
lbs.
|
kg
|
in.
|
cm
|
||
| EBF-0751 | 1/2″, 3/4″ and 1″ Conduit Entry Boot Fitting |
1.2
|
0.5
|
2-3/8″
|
6.03
|
| EBF-0150 | 1.5″ Entry Boot Fitting for 1.5” DW FlexWorks Pipe |
1.5
|
0.7
|
3-3/4″
|
9.52
|
| EBF-0200 | 2″ Entry Boot Fitting for 2″ DW FlexWorks Pipe or 2″ LCX |
1.8
|
0.8
|
3-3/4″
|
9.52
|
| EBF-0200F | 2″ Entry Boot Fitting for 2″ DW FlexWorks or 2″ Rigid Pipe |
1.3
|
0.6
|
3-3/4″
|
9.52
|
| EBF-0300 | 3″ Entry Boot Fitting for 3″ DW FlexWorks Pipe |
1.8
|
0.8
|
5-1/2″
|
12.7
|
| EBF-0400 | 4″ Entry Boot Fitting for 4″ Rigid Pipe/AXP Pipe |
2.0
|
0.9
|
5-1/2″
|
13.97
|
| EBF-0600 | 6″ Entry Boot Fitting for 6″ Rigid Pipe |
Saber Saw
|
|||
| SAB-7400 | 4″ Sump Access Boot |
2.0
|
0.9
|
5″
|
12.7
|
Enquire about this product
All pictures shown are for illustration purpose only. Actual product may vary. All specifications are subject to change without notice.
